Home Sauna Kit Install

The Sauna Company provides a hassle-free delivery. A team of two will deliver and install the sauna in the desired space.

• Hassle-free delivery only (price estimated on location). 
• Delivery & installation in desired location. A team of two will deliver and install the sauna in the desired space.
• Warehouse pick up.
• An appropriate vehicle is required as flat-pack sauna kits can weigh up to 340kg.
  

• The sauna install can take approximately 6-8 hours depending if it's location within your home.  Note: Indoor saunas do not require the additional roof option as the roof is suitable for indoor use. 
• External Saunas require the additional colourbond roof option.

•  Placement of the heater, rocks and the LED backrest light installation will be completed by a licensed electrician.
• Our team will remove all waste and dispose of it off-site. 

Alternatively, the kit range provides easy-to-follow instructions and all the hardware required to assemble your prefabricated DIY sauna kit room. A qualified electrician is required to undertake the electrical works in relation to the sauna heater and LED light. 

‼️ Limited Sauna Stock Available ‼️

If you wish to proceed with a sauna purchase, we will provide a detailed quote outlining your chosen sauna model, along with delivery or installation options.

Once you approve the quote, an invoice will be issued.

Please note that full payment for the sauna is required before delivery or installation.

Delivery and installation will be invoiced separately upon completion.

All of the SAWO rooms are constructed from premium grade materials including circa 70mm thick double insulated wall panels which are lined on both sides with 14mm kiln dried western red cedar boards. 

The result is a fully insulated, high-quality Western Red Cedar sauna that far exceeds the build quality of cheaper, flat-pack saunas commonly found online. For superior quality control, every unit is pre-assembled in SAWO’s factory before shipping to ensure a precise fit and perfect finish. When fully assembled, these rooms weigh upwards of 340 kg, a testament to their strength and craftsmanship.

The kits need to be on a solid surface eg slab, decking, paving etc.

This needs to be completed prior to installation.

A roof structure must be constructed or installed to protect the insulated ceiling as it is not waterproof. A colorbond skillion roof is recommended, there is an optional cost for this service provided by us. Otherwise engaging with a builder or a local tradesman to carry out the works is also achievable.

In addition, if installed outside the external WR cedar should be treated with a suitable protective oil. This should be applied annually thereafter to protect it from the elements and ensure its longevity.



Ask us for recommendations!

The sauna rooms are supplied with a traditional hot rock SAWO stainless steel electric sauna heater matched to the size of the room. 

The Sunset room is supplied with a SAWO Mini X 3kW heater
The Temptation with a SAWO Scandia 4.5kW heater 
The Paradise with a SAWO Scandia 6kW heater. 

These heaters must be wired to their own dedicated circuit on your switchboard. They can be connected to either single-phase or three-phase power.

⚡️ Power loads for SAWO Sauna Heaters: 

💦 Water can be ladled on the rocks once they are hot.

🇦🇺 The heaters are manufactured to an Australian specification and they have built-in temperature and timer controls located on the outer cover for ease of access. 

💡There is an internal LED that needs to be connected to a switched light feed.

🦺 Cabling for the heater and light is undertaken by a registered electrician through pre-installed conduit inside the insulated wall panelling which is accessed from the ceiling. Wiring must be undertaken by a qualified electrician in accordance with current regulations and install guidelines.